Document 11012345
Frequently Asked Questions (FAQ)
Document 11013787
When performing the MGSS Workshop Manual 360 View Monitor System Aiming Procedure, M-MDS may show error message "Procedure unsuccessful". This may be caused by light glare on the SST.
Document 11013788
Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life. NOTE: Some customers may complain about an engine no start. This may be caused by the customer inadvertently putting the key transmitter in Power Saving Function.
Document 11013792
Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.
Document 11014796
Some vehicles may experience the front inner brake pads wear out faster than the outside. For example, the brake pads need to be replaced at less than 12,500 miles (20,000km). This accelerated pad wear may be caused by dirt and sand easily adhering to the inner friction surface of the disc while driving. To eliminate this concern, the shape of the dust cover has been changed and modification of the front brake pads is under study.
Document 11014804
Some customers may complain about a rattle from the sunroof (panorama roof) area. Make sure to read the complete repair procedure before attempting any repairs as the sunroof may have rattles from more than one location. The rattle noise may be caused by: Looseness in the side cover fitting part 1. Looseness in the cross brace cover clip 2. Looseness in the movable part inside the sunroof unit 3.Looseness in the movable part inside the sunroof unit