Use arrow keys, swipe, or choose any thumbnail.
2023 · Big Horn/Lone Star
$32,245
MSRP $37,549
Listed as available at Umansky Toyota in Glendale, WI. Inventory last confirmed Aug 12, 2026. Contact the dealer to confirm current availability.
Browse more from Umansky Toyota on Autorrive →Autorrive Report
Here’s the official information available for this vehicle as of Aug 29, 2026. If a detail comes from a matching model or configuration rather than this specific vehicle, we’ll say so.
Vehicle specifications
Exact VIN decode
Matched year, make and model · not VIN-specific
0 NHTSA investigations found for this model year
544 communications found for this model year
These records can include service bulletins, repair instructions, campaigns, warranty extensions, software updates and other manufacturer notices. The total is not a problem rate or reliability score.
FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule as indicated in the Owner s Manual. If the Filter is restricted or blocked then replace the part. For customers that drive light duty trucks in extreme dusty and dirty road conditions, please reference information only TSB 25-009-24 for an available MOPAR Dual EVAP Filter kit that is customer paid.
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
Outside Exterior Mirror Power Extend And/Or Retract Is Not Fully Functional.
MODULE Steering Control Before replacing the steering column control module (SCCM) due to turn signal inop, wipers inop, steering controls inop, TCS light DTC C0051 or horn blowing while turning, please follow these steps: 1.- Refer to service library procedure and follow diagnosis steps. 2.- If failure still present, make sure all the switches', horn's, airbag's harness are properly connected and there is no corrosion or pinching, disconnect the switches & reconnect them, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between SCCM and BCM. For example, activate turn signals or wipers. 4.- Read at the BCM diagnosis session if BCM is receiving information from SCCM. Through diagnosis review if activation from horn, wipers or turn signal is requested and are working. 5.- Disconnect the SCCM fuse for around 30s,and repeat the previou
Door Latch, Handle And Ajar Additional Service Information.
"Squeak Noise From Brake Pedal When Pressed And Or Released."
Send your basic contact information now. Trade and financing details are optional on the next screen.