Swipe left or right for photos. Pinch to zoom. Open the photo for full screen.
Price Coming Soon
MSRP $29,396
Memphis, TN · Inventory confirmed Nov 15, 2026.
Contact the dealer to confirm availability.
Loading vehicle information…
Send your basic contact information now. Trade and financing details are optional on the next screen.
This vehicle may qualify for:
Availability and eligibility vary. Ask the dealer about coverage and terms.
Know more. Choose with confidence.
2023 Infiniti QX60 · AWD
See the crash-test results, reported safety equipment, and the evidence behind them.
Yes = VIN reported. Standard = manufacturer’s model guide. Optional = installation unconfirmed. Tap ⓘ for details.
Vehicle information checked Nov 15, 2026. Model-level information is identified separately from equipment reported for this VIN.
Vehicle specifications
Exact VIN decode
EPA-matched vehicle configuration
Equipment does not establish crash performance. Driver assistance requires an attentive driver. Confirm optional equipment and connected-service activation with the dealer. Manufacturer data: NHTSA VIN decode, checked Nov 14, 2026.
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as Active, Past, or Pending in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
FRONT FASCIA POPPING OUT NEAR HEADLAMP IF YOU CONFIRM The Front Bumper Fascia is detaching from the fender under the headlamp on one/or both sides. ACTION Refer to the SERVICE PROCEDURE in this bulletin to: 1. Remove the Front Bumper Fascia. 2. Replace the affected Headlamp Bracket. 3. Replace the affected Front Bumper Fascia Side Bracket. 4. Reinstall the Front Bumper Fascia, with Betaseal (or equivalent) adhesive between the Front Bumper Fascia and the affected side Front Bumper Fascia Side Bracket.
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement Certification Label or VIN Plate/Label may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. The VIN Plate/Label (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). The Certification Label (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Yes = VIN reported. Standard = manufacturer’s model guide. Optional = installation unconfirmed. Tap ⓘ for details.
Equipment does not establish crash performance. Driver assistance requires an attentive driver. Confirm optional equipment and connected-service activation with the dealer. Manufacturer data: NHTSA VIN decode, checked Nov 14, 2026.