Active inventory
  • Newly listed

2024 Ram 2500 Laramie

$52,488

MSRP $53,089

Mileage
152,555 mi
Drivetrain
4x4
Condition
Used
Body style
Truck
Transmission
6-Speed Automatic
Fuel
Diesel
Exterior
Flame Red Clearcoat
Interior
Black
Stock
H21286A
VIN
3C6UR5NL7RG103620
Wolfchase Hyundai

Memphis, TN · Inventory confirmed Sep 24, 2026.
Contact the dealer to confirm availability.

Sign in for Easy Connect

Autorrive Report

Know more. Choose with confidence.

A matched crash rating is not available in this report. Available safety equipment is shown below; features alone do not establish crash performance.

A crash-test record could not be confidently matched to this configuration.

View crash-test details and reasons

No matched NHTSA crash-test rating is available yet. We do not assign stars from a feature count or assume an unchanged model has the same rating.

Autorrive assessment

  • A complete, matched NHTSA crash-test record is needed for an Autorrive score.

Additional independent testing

IIHS evaluates crash protection, crash prevention and equipment using its own tests and grading system.

A verified independent assessment is not yet included in this report. NHTSA results above remain separate from an Autorrive composite score.

Safety features

Yes = VIN reported. Standard = manufacturer’s model guide. Optional = installation unconfirmed. Tap ⓘ for details.

Active Safety & Crash Avoidance

  • Automatic emergency braking (AEB) Optional
  • Forward collision warning (FCW) Optional
  • Blind-spot warning (BSW) Optional
  • Lane-keeping assist (LKA) Optional
  • Lane-departure warning (LDW) Optional
  • Anti-lock brakes (ABS) Yes
  • Electronic stability control (ESC) Yes
  • Brake assist Optional
  • Traction control Yes

Passive Safety & Structural Protection

  • Frontal airbags Yes
  • Side torso / seat airbags Yes
Additional reported safety equipment · 6
  • Seat beltsManufacturer reported · Manual
  • Tire-pressure monitoringManufacturer reported · Direct
  • Daytime running lightsStandard
  • Automatic high-beam switchingStandard
  • Rear visibility systemStandard
  • Side-Impact Air BagsDealer listed

Equipment does not establish crash performance. Driver assistance requires an attentive driver. Confirm optional equipment and connected-service activation with the dealer. Manufacturer data: NHTSA VIN decode, checked Sep 23, 2026.

Recalls, investigations and service information

Open safety recalls

A current VIN-specific recall result is not available in this report. Crash-test ratings do not establish whether recalls have been repaired. Ask the dealer for the current recall status and completed repair records for this VIN.

VIN: 3C6UR5NL7RG103620

Matched year, make and model · not VIN-specific

NHTSA investigations and service information

Defect investigations

0 NHTSA investigations found for this model year

Manufacturer communications

305 communications found for this model year

These records can include service bulletins, repair instructions, campaigns, warranty extensions, software updates and other manufacturer notices. The total is not a problem rate or reliability score.

View example records

Document 11011992

switch Electronic range select Before replacing the switch electronic gear selector 68379834AB due to P0826-29, P0826- 11 active codes, please follow these steps: 1.- Refer to service library procedure and follow diagnosis steps at BCM. 2.- If failure still present, make sure the switch is properly connected and there is no corrosion or pinching, disconnect the switch & reconnect it, and reverify the issue. 3.- Verify if failure is still present, review if there is lack of communication between gear selector switch and BCM. For example, try switching between driving modes. 4.- Read at the BCM diagnosis session if BCM is receiving information from gear selector. 5.- Do a hard reset to BCM and evaluate if any DTC or failure code is set. Retest if failure still present. If there are no DTC's, physical defects, gear selector inop, then the Electronic Gear Selector Switch does not need to be

Document 11011995

SEAT BELT Front Outer Seatbelt Slow Retraction / Seat Belt Cleaning If the vehicle exhibits slow seatbelt retraction, prior to replacing seatbelt please inspect for debris and any build up on the webbing and DRing. If evidence of debris and build up, please clean seatbelt webbing or turning loop as described below. Seat Belt Maintenance: Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth. Sun damage can also weaken the fabric. Replace the belts if they appear frayed or worn or if the buckles do not work properly. NOTE: If the belts retract slowly, inspect the upper turning loop for soiling. If soiling is present, clean with a wet soft cloth until all residue is removed.

Document 11011999

SWITCH Mirror Before replacing the driver window switch, please follow these steps: 1.- Review the telescopic mirror Switch for any physical issue (Button stuck, broke). If no physical issue identified, move to next steps. 2.- Make sure the switch harness is properly connected, disconnect the switch and reconnect it, and reverify the issue. 3.- Check for what DTC are detected and take proper steps. If there are no DTC's nor physical defectives, then the telescopic mirror switches can't be replaced.

Document 11012032

Push to Start Button Has a Delay Switching Ignition Positions, DTCs (Diagnostic Trouble Codes), B1A7D-2A Start Button - Stuck, U103C-00 KIN/IGNM Communication

Document 11012036

Engine Control Module (ECM) Flash Failure, Diagnostic Trouble Code (DTC) U1601 ECU Application Software Code 1 Missing Or Corrupted

Document 11012318

SEAL - OUTPUT SHAFT

Source: NHTSA Office of Defects Investigation. Checked Sep 23, 2026. Records match 2024 Ram 2500, not a specific VIN.

Vehicle information checked Sep 23, 2026. Model-level information is identified separately from equipment reported for this VIN.

Vehicle specifications

Specifications and features

VIN-decoded specifications

Engine horsepower
370 hp
Gross vehicle weight rating
Class 2H: 9,001 - 10,000 lb (4,082 - 4,536 kg)
Curb weight
8,836 lb

Dealer-provided specifications

Engine
Cummins 6.7L I6 Turbodiesel

Dealer-listed features 13

  • Side-Impact Air Bags
  • Power Seats
  • Tow Package
  • Remote Start
  • Cruise Control
  • Push Start
  • Keyless Entry
  • Navigation System
  • Bluetooth
  • Wifi Hotspot
  • Heated Seats
  • Leather Seats
  • Automatic Climate Control
VIN-decoded details come from NHTSA vPIC. Features are listed by the dealer for this vehicle; confirm equipment with the dealer.

Exact VIN decode

Factory configuration and equipment

Series
DJ
Vehicle type
TRUCK
Cab type
Mega
Seats
5
Seat rows
2
Engine
6.7L · 6-cylinder · In-Line
Engine manufacturer
Cummins, Inc.
Turbo
Yes
Manufactured in
SALTILLO, COAHUILA, MEXICO
Source: NHTSA vPIC. Decoded Sep 23, 2026. Blank fields are omitted because manufacturer VIN reporting varies.

Ask about this vehicle

Send your basic contact information now. Trade and financing details are optional on the next screen.

+1
United States & Canada: +1

By submitting, you agree to be contacted regarding your inquiry