Document 11015700
Service Bulletin - The MIL comes on with DTC P0369, Camshaft Position (CMP) EX-VTC actuator interruption due to the PCM software at start-up determining the EX-VTC actuator operation as noise of the EX-CMP sensor B, causing MIL to turn on and set DTC P0369.
Document 11023271
Service Bulletin - Oil leak at the cam chain tensioner inspection cover due to and insufficient sealant adhesion on the inspection cover.
Document 10250331
Service Bulletin - Customers are seeing the Electric Power Steering (EPS) System Indicator on the instrument panel due to the 12-volt battery degrading. It can cause low voltage to be detected during an ignition cycle. This causes the steering angle calculation to stop, which leads to DTC U3000-49 for the EPS.
Document 10253840
Service Bulletin - During the engine warm-up, the Variable Valve Timing Control system may not be able to control within the VTC target. As a result, the malfunction indicator lamp (MIL) is illuminated and sets DTC P0011 (Variable Valve Timing Control (VTC) A System Malfunction).